HP Designjet 10000s Printer series - Manual (Page 74)

Change the printhead height
You can increase or reduce the printhead height depending on the thickness of the media you are using.
Two tasks must be performed to change the printhead height:
● Mechanical height adjustment on the printhead carriage.
● Firmware height adjustment through the front panel.
To change the printhead height:
1. Press the Online key.
2. Press the Shift key to display the PH. MAIN menu.
3. Press the key to enter the PH. MAIN menu.
4. Scroll to PH HEIGHT ADJUSTon the front panel and press OK to confirm.
The following message is displayed.
The following message is displayed.
64 Chapter 2 How do I perform basic media operations? ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?