HP Designjet 10000s Printer series - Manual (Page 92)

d. Slide the flange stopper (2) over the main scroller until you can align and fully engage it with the
keyway in the flange spacer (1). Do not tighten the locking knob at this stage.
7. Install the main scroller in the printer.
If you are working alone you will need a transport cart (2) to install the main scroller (1).
If there are two people available to load the main scroller (1) by hand, one person will need to use the
scroller handling grip (2) to support the main scroller (1).
82 Chapter 2 How do I perform basic media operations? ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?