HP Designjet 10000s Printer series User Manual
Page 153
Advertising
15.
Lower the media load lever (1).
16.
Adjust the media edge guards (1) so that they are correctly positioned over the edge of the media.
17.
Close the rear cover.
To complete the procedure, follow the front panel instructions.
18.
Confirm the position of the media edge guards and press the
OK
key.
19.
Select the media position.
a.
Select BACKm using the or keys.
b.
Press the
OK
key to confirm the selection.
20.
Select a media type.
ENWW
Printing on the back of the media from the feed side (after relocating from take-up
side)
143
How
do
I per
for
m
do
ub
le-sid
ed
p
rint
in
g
Advertising