HP Designjet 10000s Printer series - Manual (Page 82)

2. Press the Shift key to display the FEED menu.
3. Hold down the key.
While the key is pressed, roll media advances. If cut sheet is loaded, it is discharged.
4. When the key is released, media feeding stops and the menu group is displayed.
Use manual nesting
When printing a small-sized image (2), such as A4, on a 64-inch width roll, a large area of media (1) is left
blank. You can rewind the roll and nest an image in the blank area using the Origin Point Setting feature.
NOTE The manual nesting feature can be used only with roll media.
72 Chapter 2 How do I perform basic media operations? ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?