HP Designjet 10000s Printer series - Manual (Page 121)

e. Align the keys of the flange stopper (1) to fully engage it with the flange spacer and fully tighten
the knob (2) on the flange stopper to (1) lock it to the flange spacer (3) and main scroller.
2. Install the main scroller with the two media rolls in the printer (Refer to Install a media roll in the printer
using the main scroller ).
3. Insert the top edge of each media on the main scroller into the media feeder and feed each media (1)
through the printer until they almost touch the floor.
ENWW Install dual media rolls on the main scroller 111
How do
I use dual medi
a
rolls?