HP Designjet 10000s Printer series User Manual
Page 234
4.
Press the or keys to select the ROUGH print mode, and press the
OK
key.
5.
Press the
OK
key to print the pattern.
In this example, the color is black.
Nine patterns are printed in 0.25% steps in a range of 99.00% to 101.00%.
●
A — Dark lines are visible; the value is too low.
●
B — No lines are visible; the value is correct.
●
C — Light lines are visible; the value is too high.
NOTE
Select a mean value if the media advance value is different in every color. If you
have an image that uses one particular color, then set the value based on that color.
Set a mean value if the media advance value differs between the left and right sides of the
media.
Different values between the left and right sides of the media may be caused by skew.
6.
From the printed result, select the best media advance calibration value.
7.
Press the key, and then the
OK
key to display the current media advance calibration value.
8.
Enter the media advance calibration value, and press the
OK
key.
Select the number you want to change by using the and keys and change the numeric value using
the and keys.
224
Chapter 7 How do I get the best image quality?
ENWW
How do
I get the
best
image
q
ualit
y?