HP Designjet 10000s Printer series User Manual
Page 131
4.
Lock the empty media rolls on the main scroller.
a.
Slide the flange spacer (3) over the main scroller until it stops against the media tube.
b.
Slide the flange stopper (1) over the main scroller until you can align and fully engage it with the
keyway in the flange spacer (3).
c.
Fully tighten the knob (2) on the flange stopper (1) to lock it to the flange spacer (3) and to the
main scroller.
5.
At the rear of the printer, set the white media winding direction switch (1) to the OFF position.
6.
Carefully position the drive end of the main scroller into the drive slot for the take-up.
7.
Carefully lower the opposite end of the main scroller into the scroller retainer.
8.
To complete the operation follow the instructions from step 3 of the
Dual media rolls take-up method
1
.
ENWW
Use the take-up reel (dual media rolls)
121
How do
I use dual medi
a
rolls?