HP Designjet 10000s Printer series - Manual (Page 63)

10. Use the front panel feed menu to feed the media (1) through the media feeder far enough for it to be
taken-up on the main scroller (take-up reel).
11. Attach media to the media tube on the main scroller (take-up reel).
a. Confirm the take-up direction, inside or outside.
b. Attach the edge of the media to the media tube on the take-up reel using adhesive tape (1) at
center the center position.
c. Make sure the media is perfectly straight and then secure the outer edges with adhesive tape
(1).
ENWW Use the take-up reel 53
How
do
I p
erf
or
m
b
asic m
edi
a
o
p
erat
ions?