HP Designjet 10000s Printer series - Manual (Page 299)

1 2 3 4 5
BACK ADJUST
VAL 0 0 0 0 0
PRINT MODE
PREF SOFTWARE SOFTWARE SOFTWARE SOFTWARE SOFTWARE
HEATER PREF SOFTWARE SOFTWARE SOFTWARE SOFTWARE SOFTWARE
Media advance calibration
Media advance calibration is defined by using the M.ADV menu. Press the key to define and set values.
Media advance calibration print
Select MEDIA ADV PRINT to print a calibration pattern that will indicate optimal media advance values.
Two patterns are available: the ROUGH pattern prints a media advance pattern in 0.25% steps between
99.0 and 101.0%; the DETAIL pattern prints a media advance pattern in 0.06% steps starting from the
current setting ±0.12%.
Use the ROUGH pattern to obtain your initial values; if greater accuracy is required, use the DETAIL pattern.
The print mode selected will also affect media advance calibration patterns.
Press the Cancel key to interrupt printing.
Parameters:
● ROUGH (NORMAL) — standard and high speed print modes
● ROUGH (H-QUAL) — high quality print mode
● ROUGH (H-DENS) — high density print mode
● ROUGH (H-DENS3) — high density print mode
● ROUGH (H-QUAL2) — high quality print mode
● ROUGH (H-DENS2) — high density print mode
ENWW Media advance calibration 289
Tell m
e ab
ou
t f
ro
n
t
p
anel
m
enu
s