HP Designjet 10000s Printer series - Manual (Page 160)

12. Lower the media load lever (1).
13. Adjust the media edge guards (1) so that they are correctly positioned over the edge of the media.
14. Close the rear cover.
To complete the procedure, follow the front panel instructions.
15. Confirm the position of the media edge guards and press the OK key.
16. Select the media position.
a. Select BACKt using the or keys.
b. Press the OK key to confirm the selection.
17. Select a media type.
150 Chapter 4 How do I perform double-sided printing ENWW
How
do
I per
fo
rm
do
ub
le-si
d
ed
p
rint
in
g