HP Designjet 10000s Printer series - Manual (Page 286)

Selecting a media type number (SELECT MEDIA)
Select the media type number you intend to modify or create. You can choose from 01 to 20.
Parameters: media type number (01 to 20).
NOTE All changes to settings in the MEDIA REG menu will apply to the media that you select
or create in the SELECT MEDIA option.
Setting a media type name (RENAME MEDIA)
Rename a media type you want to modify or create.
Name the media type using up to six-digit characters (or symbols). Refer to Character list
in for the list of characters.
Parameters: a six-digit character (symbol, alphanumeric, katakana, other).
Media advance value (MEDIA ADV VALUE)
Use this option to set the media advance value for the selected media type. This value is obtained from the
Media Advance print (Refer to
Calibrate media advance for the step by step procedure).
NOTE This value will only be applied by the printer front panel setting if the ADVANCE PREF
option is set to FRONT PANEL.
Parameters: XXX.XX% (97.00 to 103.00%)
Manufacturing default media advance value (MFNG VAL)
This option displays the manufacturing default media advance value, which is factory set. This cannot be
modified by the user. Press
OK to access the option to adjust the user-definable media advance value.
276 Chapter 14 Tell me about front panel menus ENWW
Tell
me ab
ou
t f
ron
t
pan
el
menu
s