HP Designjet 10000s Printer series - Manual (Page 94)

9. Align and engage the flange stopper (2) with the keyway in the flange spacer (3) and fully tighten the
locking knob (1) to lock it to the flange spacer (1) and the main scroller.
10. Align and engage the flange stopper (2) with the keyway in the flange spacer (1) and fully tighten the
locking knob (3) to lock it to the flange spacer (1) and the main scroller.
11. Adjust the tension bar guide.
a. Loosen the locking knob (2).
b. Move the tension bar guide (1) so that it is aligned with its position label (3).
84 Chapter 2 How do I perform basic media operations? ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?