HP Designjet 10000s Printer series - Manual (Page 133)

4. Use the front panel feed menu to feed the media (1) through the media feeder far enough for it to be
taken-up on the take-up reel.
5. Use adhesive tape to attach the edge of each roll media to the media tube (1) on the take-up reel.
Outer take-up:
Inner take-up:
6. Adjust the positions of the media tube flanges to match the media width.
ENWW Use the take-up reel (dual media rolls) 123
How do
I use dual medi
a
rolls?