HP Designjet 10000s Printer series - Manual (Page 115)

18. Lower the media load lever (1).
19. Adjust the media edge guards (1) so that each pair are correctly positioned at the edge of the media.
20. Close the rear cover.
To complete the loading procedure, follow the front panel instructions.
21. Confirm the position of the media edge guards and press the OK key.
The media width checking process starts.
22. Select DUAL in the media selection on the front panel.
23. Select a media type.
ENWW Install dual media rolls on separate scrollers 105
How do
I use dual medi
a
rolls?