HP Designjet 10000s Printer series - Manual (Page 45)

10. At the front of the printer, use the black media advance switch (2), or the black media advance switch
on the foot switch, to feed enough media to insert it into the media feeder.
11. Load the media into the media feeder.
CAUTION Inserting the media obliquely or inserting media with wrinkles could cause a
media jam or skewed feed.
a. Insert the top edge of the media (1) into media feeder (2) while stretching it outwards to prevent
any wrinkling.
b. If the media curls up (1) or down (2), making it hard to insert into the media feeder, place a
backing sheet (3) on or under the curled media to make loading easier.
ENWW Install a media roll in the printer using the main scroller 35
How
do
I p
erf
or
m
b
asic m
edi
a
o
p
erat
ions?