HP Designjet 10000s Printer series - Manual (Page 130)

NOTE Use media tubes with as closely matching lengths as possible to the corresponding
media tubes on the feed side.
1. Put the first empty media tube (1) and flange spacer (3) on the main scroller (2) but do not install the
flange stopper.
2. Slide the flange joint (3) and the second flange spacer onto the main scroller shaft and align the keys
(2) of the flange joint (3) with one of the keyways (1) of the flange spacers.
3. Slide the second media tube (1) onto the until it is fully engaged with the flange spacer.
120 Chapter 3 How do I use dual media rolls? ENWW
How
do I use dua
l media roll
s?