HP Designjet 10000s Printer series User Manual
Page 290
Parameters: 15 °C to 55 °C, or ** to turn the heater off.
NOTE
For Celsius/Fahrenheit conversions:
F = (9 × C / 5) + 32
C = 5 × (F - 32) / 9
NOTE
This value will only be applied if the HEATER PREF option is set to HEAT PANEL.
Initial temperature setting for the print heater (PRINT HEATER T)
Use this option to set the printer platen heater temperature for the selected media type.
Parameters: 15 °C to 55 °C, or ** to turn the heater off.
NOTE
For Celsius/Fahrenheit conversions:
F = (9 × C / 5) + 32
C = 5 × (F - 32) / 9
NOTE
This value will only be applied if the HEATER PREF option is set to HEAT PANEL.
Initial temperature setting for the rear heater (REAR HEATER T)
Use this option to set the rear heater temperature for the selected media type.
Parameters: 15 °C to 55 °C, or ** to turn the heater off.
280
Chapter 14 Tell me about front panel menus
ENWW
Tell
me ab
ou
t f
ron
t
pan
el
menu
s