HP Designjet 10000s Printer series - Manual (Page 35)

Handling precautions
These precautions are recommended to avoid damage to your printer and its components.
Power supply
● Only use a 200-240 V AC power supply voltage.
● Check the printer electrical outlet for proper polarity and grounding before connecting printer. Failure
to do so may result in fire and electric shock hazards.
● Be sure the printer is well-grounded. Failure to ground the printer may result in electrical shock, fire,
and susceptibility to electromagnetic interference.
● Avoid overloading the printer’s electrical outlet with multiple devices.
● Use only the electrical cord supplied by HP with the printer.
Printer
● Wipe the printer clean with a soft cloth. A cloth moistened with a neutral detergent may be used. Do
not allow liquid to enter the printer. This may create risk of fire and electrical shock and cause a
malfunction. Do not clean the printer with benzene or paint thinner. This may damage the paint.
● Never touch the printhead nozzles. They can be easily damaged or clogged.
Regular inspection and maintenance
● Clean the capping unit and wiper blade every day.
● Check the moisture of the wiper sponge every day.
● Store the ink system when leaving the printer for a long time (two weeks or more with the power off).
● Clean and charge the ink system before printing when leaving the printer for a long time.
Consumables
● Ink inside the ink cartridge is combustible. Do not expose or store near open flames, sparks, or other
sources of ignition.
● HP ink cartridges must be installed before the “Install By” date printed on the cartridge. Use of the ink
cartridge 3 months beyond the “Install By” date may cause deterioration in print quality or a printer
malfunction.
● Do not disassemble the ink cartridges. Ink cartridges are intended for single use only.
● Avoid contact between ink and skin, eyes, and clothing.
● Immediately wash skin with soapy water.
● Remove clothing soaked with ink from contact with skin.
● Use an approved eye wash station if ink is splashed into eyes and consult a doctor if necessary.
If an approved eye wash station is unavailable, flush eyes with cold water and consult a doctor
if necessary.
ENWW Handling precautions 25
In
tr
od
uct
ion