HP Designjet 10000s Printer series - Manual (Page 303)

Ink (INK WASTE)
Use this menu option to control ink wastage.
Parameters:
● NORMAL — The standard ink wastage
● REDUCED — Reduced ink wastage level
The PH RECOVERY menu
This menu is used to clean the printheads of the printer (Refer to Normal printhead recovery ).
Press the key to select the PH RECOVERY menu options.
key
Parameters:
● NORMAL ALL — Performs normal cleaning of all the printheads.
● STRONG ALL — Performs strong cleaning of all the printheads.
● STRONG K, Lm, Lc — Performs strong cleaning of light cyan, light magenta and the black printheads.
● STRONG Y,M,C — Performs strong cleaning of cyan, magenta and the yellow printheads.
The FEED menu
This option allows you to feed media through the printing path. Press and hold down the key to feed the
media through the printing path. If a cut sheet is used, it is discharged.
When you press the key, a media feeding message appears on the front panel.
ENWW The PH RECOVERY menu 293
Tell m
e ab
ou
t f
ro
n
t
p
anel
m
enu
s