HP Designjet 10000s Printer series - Manual (Page 311)

15 Tell me about the heaters
This chapter describes temperature control, the heater front panel, parameter setup mode operations, and
error messages of the heater controller.
● The heaters
● Heater temperature settings
● Heater error messages
The heaters
The printer includes three heaters for fixing and stabilizing the printed image on the media. Each heater is
controlled separately.
1. Printhead
2. Rear heater (dries the ink and stabilizes the printed image)
3. Print heater (fixes the ink on to the media)
4. Front heater (preheats the media)
5. Tension bar
6. Main scroller
7. Media
ENWW The heaters 301
Te
ll me about t
h
e heaters