HP Designjet 10000s Printer series User Manual
Page 189
Advertising
●
1 x cap side edge guard for use with liner (4)
1.
Install the media in the printer.
For double-sided printing (Refer to
How do I perform double-sided printing
).
For mesh tarpaulin printing (Refer to
Print on mesh tarpaulin (without dedicated liner)
).
2.
Raise the printheads (Refer to
Change the printhead height
).
CAUTION
Always make sure the printheads are raised when using the special edge
guards. If the printheads are in the lowered position, the media may touch the printheads
and cause serious damage.
3.
Insert cap side special edge guard (1) under the edge guard (2), refer to
Use the media edge
guards
.
ENWW
Use the special edge guards for use with a liner
179
How
do
I prin
t wit
h
a lin
er
Advertising