HP Designjet 10000s Printer series User Manual
Page 111
Advertising
9.
Move the sub-scroller center holder (2) to within 10 mm of the sub-scroller flange (1) and fully tighten
the locking knob (3).
CAUTION
Make sure that the sub-scroller center holder is not touching the sub-scroller
flange. This could cause friction which would increase the tension on the media and degrade
print quality.
10.
Open the rear cover (1).
ENWW
Install dual media rolls on separate scrollers
101
How do
I use dual medi
a
rolls?
Advertising