HP Designjet 10000s Printer series - Manual (Page 217)

CAUTION Wipe the printer clean with a soft cloth. A cloth moistened with a neutral detergent
may be used. Do not allow liquid to enter the printer. This may create risk of fire and electrical
shock and cause a malfunction. Do not clean the printer with benzene or paint thinner. This may
damage the paint.
1. Unload all media from the printer.
2. Open the rear cover.
3. Using a damp cloth, clean the rear cover.
4. Using a damp cloth, absorb ink deposits on the media feed.
5. Remove dust using a vacuum cleaner.
1. Rear cover
2. Media feed
Clean the platen
You should plan to clean your printer's platen on a regular basis, every few months or when needed. When
glue adheres to the platen or there are ink marks on the platen, clean the platen according to the following
procedures.
NOTE If you print on wide media after you have used narrower media for some time, you may
find that the left side of the platen has become dirty and will leave marks on the back of the media
if not cleaned.
To clean the platen:
1. Unload all media from the printer.
2. Open the rear cover.
ENWW Clean the platen 207
How do
I mai
n
tai
n
the
print
er?