HP Designjet 10000s Printer series User Manual
Page 171
Advertising
13.
Lift the media load lever (1).
14.
At the rear of the printer, press the white rewind switch (1) to wind the liner onto the media tube
approximately two turns.
15.
At the front of the printer, use the black media advance switch (2) to feed the liner from the media tube
and position the tension bar.
16.
If you have not already done so, install main scroller containing the printed media you are going to
print on the back of.
ENWW
Double sided printing with a liner
161
How
do
I prin
t wit
h
a lin
er
Advertising