HP Designjet 10000s Printer series - Manual (Page 19)

Main scroller controls
This section describes the controls provided for the feed and take-up side scroller drive units and the
associated remote foot switches.
Media feed side control panel
NOTE Media advance and rewind always refers to the media travel through the media path
from the feed side to the take-up side of the printer and NOT to the media advance or rewind on
the actual main scrollers.
The media feed controls are located on the control panel next to the main scroller drive unit at the feed side
of the printer. This control panel provides the necessary switches to control the manual advance or rewind
of media through the media path (from the feed side to take-up side of the printer). It also provides and
method of selecting which side of the main scroller to wind the media (inside or outside).
Main scroller drive controls:
1. The white two-position media winding direction switch (1) which is used to select which side of the
main scroller to wind the media on (inside or outside).
2. The black media advance push switch (2), which is used to feed media from the main scroller through
the print path (from the feed side to take-up side of the printer) in the direction set with the winding
direction switch (1). The same operation can also be controlled using the black button on the foot
switch connected at the feed side of the printer.
3. The white media rewind push switch (3), which is used to rewind media to the main scroller through
the print path (from the feed side to take-up side of the printer) back onto the main scroller. The same
operation can also be controlled using the black button on the foot switch connected to the feed side
of the printer.
Take-up side control panel
NOTE Media advance and rewind always refers to the media travel through the media path
from the feed side to the take-up side of the printer and NOT to the media advance or rewind on
the actual main scrollers.
ENWW Main scroller controls 9
In
tr
od
uct
ion