HP Designjet 10000s Printer series - Manual (Page 292)

Printhead height setting (PH HEIGHT VAL)
Use this option to set the printhead height for the selected media type. Change this setting when you change
the printing carriage height.
Parameters:
● NORMAL — Default.
● HIGH — Set for thick media.
Bidirectional print position (Left) adjustment (YY BIDIR DEF(L))
For the selected media type, use this option to adjust the position of all the printheads on the left side, when
using bidirectional printing.
Enter an adjustment value based on the printhead adjustment pattern print (Refer to Calibrate the
printer ).
YY: Ink color
Display order: K -> Lm -> Lc -> Y -> M -> C
Parameters: sign (+/-), value (-32 to +31)
Bidirectional print position (Right) adjustment (YY BIDIR DEF(R))
For the selected media type, use this option to adjust the position of all the printheads on the right side,
when using bidirectional printing.
Enter an adjustment value based on the bidirectional calibration print (Refer to Calibrate the printer ).
YY: Ink color
Display order: K -> Lm -> Lc -> Y -> M -> C
Parameters: sign (+/-), value (-32 to +31)
Bidirectional print position (Left) adjustment (YY BIDIR F.D (L))
For the selected media type, use this option to adjust the position of all the printheads on the left side, when
using bidirectional printing.
Enter an adjustment value based on the printhead adjustment pattern print (Refer to Calibrate the printer ).
282 Chapter 14 Tell me about front panel menus ENWW
Tell
me ab
ou
t f
ron
t
pan
el
menu
s