Verify the firmware upgrade – Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual User Manual
Page 211
Advertising
Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
211
Upgrade the Drive Firmware
Appendix B
Verify the Firmware Upgrade
Follow these steps to verify your firmware upgrade was successful.
1. Open your RSLinx software.
2. From the Communications menu, choose RSWho.
3. Expand your Ethernet node, Logix backplane, and EtherNet/IP network
module.
4. Right-click the drive module and choose Device Properties.
The Device Properties dialog box appears.
5. Verify the new firmware revision level.
6. Click Close.
TIP
Verifying the firmware upgrade is optional.
Advertising