Rockwell Automation 2198-Hxxx Kinetix 5500 Servo Drives User Manual - Manual (Page 22)

22 Rockwell Automation Publication 2198-UM001D-EN-P - May 2014
Chapter 1 Start
Star Topology
In this example, the devices are connected by using star topology. Each device is
connected directly to the switch.
Kinetix 5500 drives have dual ports, so linear topology is maintained from drive-
to-drive, but Kinetix 5500 drives and other devices operate independently. The
loss of one device does not impact the operation of other devices.
Figure 8 - Kinetix 5500 Star Communication Installation
1 (Front)
2 (Rear)
00:00:BC:2E:69:F6
1585J-M8CBJM-x
Ethernet (shielded) Cable
1734-AENTR POINT I/O
EtherNet/IP Adapter
CompactLogix Controller Programming Network
PanelView Plus
Display Terminal
1783-BMS
Stratix 5700™
Switch
1585J-M8CBJM-OM3
0.3 m (1.0 ft) Ethernet cable
for drive-to-drive connections.
Kinetix 5500 Servo Drive System
CompactLogix 5370 Controller Logix Designer
Application