Http copy via cli, Copy http, 10 http copy via cli – Dell PowerEdge FX2/FX2s User Manual
Page 128
10
HTTP Copy via CLI
This chapter describes the HTTP Copy via CLI command in the Dell Networking OS.
copy http
Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP,
and SCP (in the hostip field).
Syntax
copy http://10.16.206.77/sample_file flash://sample_filecopy
flash://sample_file http://10.16.206.77/sample_file
You can copy from the server to the switch and vice-versa.
Parameters
copy http:
flash:
Address or name of remote host [10.16.206.77]:
Port number of the server [80]:
Source file name [sample_file]:
User name to login remote host: x
Password to login remote host:
Destination file name [sample_file]:
Defaults
None.
Command
Modes
EXEC
Command
History
Version 9.5(0.0)
Supported on the FN I/O aggregator.
Example
copy http://admin:[email protected]/sample_file flash://
sample_file
Related
Commands
copy ftp:flash
Copy files from FTP server to switch
128