Dell PowerEdge FX2/FX2s - Manual (Page 88)

enable
Change the access privilege level.
Syntax enable [user| admin]
Command
Modes
• uBoot
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
help
Displays the help menu.
Syntax help
Command
Modes
• uBoot
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
BOOT_USER # help
***** Dell Force10 Boot Interface Help Information *****
Current access level: USER LEVEL
Use "syntax help" for more information on syntax.
Available command list (22 commands total):
boot change [primary|secondary|default]
change operating system boot parameters
boot selection [a|b]
change the rom bootstrap bootflash partition
boot show net config retries
show number of retries for network boot config failure
boot write net config retries <int>
write number of retries for network boot config failure
boot zero [primary|secondary|default]
zero operating system boot parameters
default-gateway <ip-address>
default-gateway - set the default gateway ip address
enable [user|admin]
change access privilege level
help
display help menu
-(36%)-Use <CR> to continue, q to stop:
BOOT_USER #
88