Dell PowerEdge FX2/FX2s User Manual
Page 408
Defaults
Use the enable password.
Command
Modes
CONFIGURATION
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Usage
Information
By default, the Enable password is used. If you configure aaa authentication
enable default, Dell Networking Operating System (OS) uses the methods
defined for Enable access instead.
Methods configured with the aaa authentication enable command are
evaluated in the order they are configured. If authentication fails using the primary
method, Dell Networking Operating System (OS) employs the second method (or
third method, if necessary) automatically. For example, if the TACACS+ server is
reachable, but the server key is invalid, Dell Networking OS proceeds to the next
authentication method. The TACACS+ is incorrect, but the user is still
authenticated by the secondary method.
Related
Commands
— changes the password for the enable command.
— enables AAA login authentication on the terminal lines.
— specifies a RADIUS server host.
— specifies a TACACS+ server host.
aaa authentication login
Configure AAA Authentication method lists for user access to EXEC mode (Enable log-in).
Syntax
aaa authentication login {method-list-name | default} method
[... method4]
To return to the default setting, use the no aaa authentication login
{method-list-name | default} command.
Parameters
method-list-
name
Enter a text string (up to 16 characters long) as the name of a
user-configured method list that can be applied to different
lines.
default
Enter the keyword default to specify that the method list
specified is the default method for all terminal lines.
method
Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode.
• line: use the password the password command defines
in LINE mode.
• none: no authentication.
408