Dell PowerEdge FX2/FX2s - Manual (Page 96)

Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
clear ets counters
Clear ETS TLV counters.
Syntax clear ets counters [tengigabitethernet slot/port]
Parameters
slot/port Enter the slot/port number.
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax clear pfc counters [port-type slot/port [statistics]]| [stack-
unit {unit-number | all} stack-ports all]
Parameters
port-type Enter the keywords port-type then the slot/port
information.
stack-unit unit
number Enter the keywords stack-unit then the stack-unit
number to clear. The range is from 0 to 5.
all stack-ports
all Enter the keywords all stack-ports all to clear the
counters on all interfaces.
statistics Enter the keyword statistics to clear only the hardware
PFC counters.
Defaults None
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
96