Dell PowerEdge FX2/FX2s - Manual (Page 372)

Column Heading Description
Interface Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
• gi — Gigabit Ethernet then a slot/port.
• po — Port Channel then a number. The range is from 1
to 255 for TeraScale.
• so —SONET then a slot/port.
• te — 10 Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use
(Inactive).
Example
Dell#show mac-address-table
VlanId Mac Address Type Interface State
20 00:00:c9:ad:f6:12 Dynamic Te 0/3 Active
Dell#
Usage
Information
The following describes the show mac-address-table command shown in the
following example.
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured
(Static), learned (Dynamic), or associated with a specific port
(Sticky). An (N) indicates that the specified MAC address has
been learnt by a neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
• gi — Gigabit Ethernet then a slot/port
• po — Port Channel then a number. The range is from 1
to 255. \
• so — SONET then a slot/port.
• te — 10–Gigabit Ethernet then a slot/port.
State Lists if the MAC address is in use (Active) or not in use
(Inactive).
The following describes the show mac-address-table count command shown
in the following example.
Line Beginning
With Description
MAC Entries... Displays the number of MAC entries learned per VLAN.
372