Dell PowerEdge FX2/FX2s - Manual (Page 64)

* Management Unit
Example
(thermal-
sensor)
Dell#show environment thermal-sensor
-- Thermal Sensor Readings (deg C) --
Unit Sensor0 Sensor1 Sensor2
-------------------------------
0 55 45 58
Dell#
show inventory
Display the switch type, components (including media), and Dell Networking OS version including
hardware identification numbers and configured protocols.
Syntax show inventory [media slot]
Parameters
media slot (OPTIONAL) Enter the keyword media then the stack ID of
the stack member you want to display pluggable media
inventory.
Defaults none
Command
Modes EXEC
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information If there are no fiber ports in the unit, just the header under show inventory
media displays. If there are fiber ports but no optics inserted, the output displays
"Media not present or accessible".
Example
Dell#show inventory
System Type : PE-FN-410S-IOA
System Mode : 1.0
Software Version : 1-0(0-1859)
Unit Type Serial Number Part Number
Rev Piece Part ID Rev Svc Tag Exprs Svc Code
---------------------------------------------------------------
------------------------------------------------------
* 0 PowerEdge-FN-410S-IOA TW000000000020 07NVPVX01
X01 TW-07NVPV-00000-000-0020 X01 N/A N/A
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
DCBX
FIP Snooping
IGMP
64