Monitor session mode, Protocol lldp mode – Dell PowerEdge FX2/FX2s User Manual
Page 30
1.
Verify that you are logged in to CONFIGURATION mode.
2.
Enter the line command. Include the keywords console or vty and their line number available on
the switch. The prompt changes to include (config-line-console) or (config-line-vty).
You can exit this mode by using the exit command.
MONITOR SESSION Mode
In CONFIGURATION mode, use the monitor session command to enter MONITOR SESSION mode
and configure port monitoring.
To enter MONITOR SESSION mode:
1.
Verify that you are logged in to CONFIGURATION mode.
2.
Use the monitor session command. Include the monitor session ID. The prompt changes to
Dell(conf-mon-sess-1)#.
You can return to CONFIGURATION mode by using the exit command.
PROTOCOL LLDP Mode
In CONFIGURATION mode, use the protocol lldp command to enter PROTOCOL LLDP mode and
configure the LLDP protocol.
To enter PROTOCOL LLDP mode:
1.
Verify that you are logged in to CONFIGURATION mode.
2.
Enter the protocol lldp command. The prompt changes to include (config-lldp).
You can return to CONFIGURATION mode by using the exit command.
30