Dell PowerEdge FX2/FX2s User Manual
Page 43
boot
for the current boot configuration
ftp
for the current FTP configuration
igmp
for the current IGMP configuration
interface
for the current interface configuration
line
for the current line configuration
lldp
for the current lldp configuration
logging
for the current logging configuration
management-
route
for the current Management port
forwarding configuration
monitor
for the current Monitor configuration
snmp
for the current SNMP configuration
uplink-
state-group
for the uplink state group
configuration
users
for the current users configuration
configured
(OPTIONAL) Enter the keyword configured to display line
card interfaces with non-default configurations only.
status
(OPTIONAL) Enter the keyword status to display the
checksum for the running configuration and the start-up
configuration.
Command
Modes
EXEC Privilege
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Example
Dell#show running-config
Current Configuration ...
! Version 9-4(0-180)
!
boot system stack-unit 0 primary tftp://10.11.8.12/dv-ci-stomp-
tc-1-a1
!
redundancy auto-synchronize full
!
hostname Dell
...
Example
Dell#show running-config status
running-config bytes 5063, checksum 0xF6F801AC
startup-config bytes 4835, checksum 0x764D3787
Dell#
Usage
Information
The status option allows you to display the size and checksum of the running
configuration and the startup configuration.
43