Dell PowerEdge FX2/FX2s - Manual (Page 322)

Parameters
interface type
slot/port Display DHCP client statistics on the specified interface.
• For the management interface on the stack-unit, enter
the keyword managementethernet followed by slot/
port information. The slot and port range is 0.
• For a VLAN, enter the keyword vlan followed by a
number from 1 to 4094.
Command
Modes EXEC Privilege
Default Display DHCP lease information on all DHCP client-enabled interfaces on the
switch.
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
File Management
This chapter contains commands needed to manage the configuration files and includes other file
management commands.
The commands in this chapter are supported by the Dell Networking OS.
boot system gateway
Specify the IP address of the default next-hop gateway for the management subnet.
Syntax boot system gateway ip-address
Parameters
ip-address Enter an IP address in dotted decimal format.
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
Saving the address to the startup configuration file preserves the address in NVRAM
in case the startup configuration file is deleted.
boot system stack-unit
Specify the location of the Dell Networking OS image to be used to boot the system.
Syntax boot system stack-unit <0-5 | all> {default | primary |
secondary}
322