Show port-channel-flow – Dell PowerEdge FX2/FX2s User Manual
Page 191
TenGig 0/1 200 200 0 0 0 0
Dell#
Related
Commands
— Clears the LACP counters.
— Displays the information on configured Port
Channel groups.
show port-channel-flow
Display an egress port in a given port-channel flow.
Syntax
show port-channel-flow port-channel number incoming-interface
interface { src-mac address dest-mac address {vlan vlanid |
ether-type }} [ src-ip address dest-ip address ] [ src-port
number dest-port number ]
Parameters
port-channel
number
Enter the keywords port-channel then the number of the
port channel to display flow information. The range is from 1
to 128.
incoming-
interface
interface
Enter the keywords incoming-interface then the
interface type and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
src-mac
address
Enter the keywords src-mac then the MAC source address
in the nn:nn:nn:nn:nn:nn format.
dest-
macaddress
Enter the keywords dest-mac then the MAC destination
address in the nn:nn:nn:nn:nn:nn format.
vlan vlan-id
Enter the keyword vlan then the VLAN ID. The range is from
1 to 4094.
ether-type
Enter the keywords ether-type then the ether-value in the
XX:XX format.
src-ip address
Enter the keywords src-ip then the IP source address in IP
address format.
dest-ip address
Enter the keywords dest-ip then the IP destination address
in IP address format.
src-port
number
Enter the keywords src-port then the source port number.
The range is from 1 to 65536. The default is None.
dest-port
number
Enter the keywords dest-port then the destination port
number. The range is from 1 to 65536. The default is None.
191