Dell PowerEdge FX2/FX2s - Manual (Page 423)

show system stack-unit iom-mode
Displays the current iom-mode (stack/standalone) and the mode configured after next reboot.
Syntax show system stack-unit unit-number iom-mode
Parameters
unit number
<0–5> Enter the number of the member stack unit. The range is
from 0 to 5.
Command
Modes EXEC Privilege
Command
History
Version 9.6.
(0.0) Supported on the FN I/O Aggregator.
Usage
information This command is supported on the FN410S and the FN410T Aggregators
Example
Dell#show system stack-unit all iom-mode ?
| Pipe through a command
<cr>
Dell#show system stack-unit all iom-mode
Unit Boot-Mode Next-Boot
------------------------------------------------
0 stack stack
1 stack stack
2 stack stack
3 stack stack
4 Not Present
5 Not Present
Dell#
show system stack-unit stack-group
Displays the stack-groups present/configured for a FN I/O Aggregator stack unit.
Syntax show system stack-unit unit-number stack-group [configured]
Parameters
unit number
<0–5> Enter the number of the member stack unit. The range is
from 0 to 5.
Defaults none
Command
Modes EXEC Privilege
Command
History
Version 9.6.
(0.0) Supported on the FN I/O Aggregator.
Usage
Information This command is supported on the FN410S and the FN410T Aggregators.
Example
Dell#show system stack-unit 0 stack-group ?
configured Configured stack groups
423