Dell PowerEdge FX2/FX2s - Manual (Page 51)

disable
Return to EXEC mode.
Syntax disable [level]
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell
Networking OS. The range is from 0 to 15. The default is 1.
Defaults 1
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
enable
Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may
need to enter a password.
Syntax enable [level]
Parameters
level (OPTIONAL) Enter a number for a privilege level of the Dell
Networking OS. The range is from 0 to 15. The default is 15.
Defaults 15
Command
Modes EXEC
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information Users entering EXEC Privilege mode or any other configured privilege level can
access configuration commands. To protect against unauthorized access, use the
enable password command to configure a password for the enable command
at a specific privilege level. If no privilege level is specified, the default is privilege
level 15.
Related
Commands enable password — configures a password for the enable command and to
access a privilege level.
51