Dell PowerEdge FX2/FX2s - Manual (Page 245)

show snmp group
Display the group name, security model, status, and storage type of each group.
Syntax show snmp group
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information The following Example displays a group named ngroup. The ngroup has a security
model of version 3 (v3) with authentication (auth), the read and notify name is
nview with no write view name specified, and finally the row status is active.
Example
Dell#show snmp group
groupname: ngroup security model: v3 auth
readview : nview writeview: no write view specified
notifyview: nview
row status: active
Dell#
show snmp user
Display the information configured on each SNMP user name.
Syntax show snmp user
Command
Modes
• EXEC
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell#show snmp user
User name: v1v2creadu
Engine ID: 0000178B02000001E80214A8
storage-type: nonvolatile active
Authentication Protocol: None
Privacy Protocol: None
Dell#
245