Dell PowerEdge FX2/FX2s - Manual (Page 146)

• auto-negotiation disabled speed 100
• auto-negotiation enabled speed 100
• auto-negotiation disabled speed 100
Link Status Between Port 1 and Port 2
• Up at 1000 Mb/s
• Up at 100 Mb/s
• Up at 100 Mb/s
• Down
• Down
* You cannot disable auto-negotiation when the speed is set to 1000 or auto.
Related
Commands speed (for 1000/10000 interfaces) — sets the link speed to 10, 100, 1000 or auto-
negotiate the speed.
show config (INTERFACE mode)
Displays the interface configuration.
Syntax show config
Command
Modes INTERFACE
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example
Dell(conf-if)#show conf
!
interface TenGigabitEthernet 0/7
no ip address
switchport
no shutdown
Dell(conf-if)#
show config (from INTERFACE RANGE mode)
Display the bulk configured interfaces (group).
Syntax show config
Command
Modes CONFIGURATION INTERFACE (conf-if-range)
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
146