Dell PowerEdge FX2/FX2s - Manual (Page 186)

Parameters
isolated-
networks Specify an isolated network to be configured
vlan vlan-
range Enter the keyword vlan followed by the member VLANs
using VLAN IDs (separated by commas), a range of VLAN IDs
(separated by a hyphen), a single VLAN ID, or a combination.
For example: VLAN IDs (comma-separated): 3, 4, 6. Range
(hyphen-separated): 5-10. Combination: 3, 4, 5-10, 8.
Defaults None
Command
Modes EXEC Privilege
Usage
Information This command is used to show the isolated-network feature status and the VLANs
configured for this feature. Show running-config will save this command under io-
aggregator.
Command
History
Version 9.5(0.0) Supported on the FN I/O aggregator.
Example
Dell#show io-aggregator isolated-networks
Isolated Network Enabled VLANs : 5-10
186