Dell PowerEdge FX2/FX2s - Manual (Page 274)

stack-unit unit-
id Enter the keyword stack-unit followed by the unit-id to
display information on a specific stack member. The range is
from 0 to 5.
detail (OPTIONAL) Enter the keyword detail to view detailed
diagnostics information.
summary (OPTIONAL) Enter the keyword summary to view a summary
of the diagnostics information. By default, the summary is
displayed.
testcase Enter the keyword testcase to view the list of all the diag
tests available.
Defaults Summary
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Example 1
(show diag
information
Command)
Dell#show diag information
Diag information:
Diag software image version:
9-4(0-180)
---------------------------------------------------------------
----
Stack-unit Member 0: No Unit diags executed yet
(Stackunit not Offline).
Stack-unit Member 1: Not present.
Stack-unit Member 2: Not present.
Stack-unit Member 3: Not present.
Stack-unit Member 4: Not present.
Stack-unit Member 5: Not present.
---------------------------------------------------------------
----
Dell#
Example 2
(show diag
stack-unit
Command)
Dell#show diag stackunit 0
Diag status of Stackunit member 0:
---------------------------------------------------------------
-----------
Stackunit is currently offline.
Stackunit level0 diag issued at Tue May 15, 2012 11:11:47 AM.
Current diag status: Unit diags are terminated.
Total number of diags: 17
Number of diags performed: 1
Number of diags passed: 1
Number of diags failed: 0
Number of diags pending: 16
Last Test executed: POWERRAILSTATUSTEST
Last notification received at: Tue May 15, 2012 11:12:24 AM
---------------------------------------------------------------
-----------
274