Radius-server retransmit – Dell PowerEdge FX2/FX2s User Manual
Page 224
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Usage
Information
To configure any number of RADIUS server hosts for each server host that is
configured, use this command. Dell Networking Operating System (OS) searches
for the RADIUS hosts in the order they are configured in the software.
The global default values for the timeout, retransmit, and key optional
parameters are applied, unless those values are specified in the radius-server
host or other commands. To return to the global default values, if you configure
the timeout, retransmit, or key values, include those keywords when using the
no radius-server host command syntax.
Related
Commands
— sets the database to be checked when a user logs in.
— sets the number of times the RADIUS server attempts to
send information.
— sets the time interval before the RADIUS server times out.
radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, use the no radius-server retransmit
command.
To return to the default setting, use the radius-server retransmit 3
command.
Parameters
retries
Enter a number of attempts that Dell Networking Operating
System (OS) tries to locate a RADIUS server. The range is
from zero (0) to 100. The default is 3 retries.
Defaults
3 retries
Command
Modes
CONFIGURATION
Command
History
Version 9.4(0.0)
Supported on the FN I/O aggregator.
Related
Commands
— configures a RADIUS host.
224