Dell PowerEdge FX2/FX2s User Manual

Page 154

Advertising
background image

Usage
Information

The following describes the show interfaces port-channel command shown
in the following example.

Field

Description

Port-Channel 1...

Displays the LAG’s status. In the Example, the status of the
LAG’s LAG fate-sharing group (“Failover-group”) is listed.

Hardware is...

Displays the interface’s hardware information and its
assigned MAC address.

Port-channel is
part...

Indicates whether the LAG is part of a LAG fate-sharing
group (“Failover-group”).

Internet address...

States whether an IP address is assigned to the interface. If
an IP address is assigned, that address is displayed.

MTU 1554...

Displays link and IP MTU.

LineSpeed

Displays the interface’s line speed. For a port channel
interface, it is the line speed of the interfaces in the port
channel.

Members in this...

Displays the interfaces belonging to this port channel.

ARP type:...

Displays the ARP type and the ARP timeout value for the
interface.

Last clearing...

Displays the time when the show interfaces counters
were cleared.

Queueing
strategy.

States the packet queuing strategy. FIFO means first in first
out.

packets input...

Displays the number of packets and bytes into the interface.

Input 0 IP
packets...

Displays the number of packets with IP headers, VLAN
tagged headers, and MPLS headers. The number of packets
may not add correctly because a VLAN tagged IP packet
counts as both a VLAN packet and an IP packet.

0 64-byte...

Displays the size of packets and the number of those
packets entering that interface. This information is displayed
over two lines.

Received 0...

Displays the type and number of errors or other specific
packets received. This information is displayed over three
lines.

Output 0...

Displays the type and number of packets sent out the
interface. This information is displayed over three lines.

Rate information... Displays the traffic rate information into and out of the

interface. Traffic rate is displayed in bits and packets per
second.

Time since...

Displays the time since the last change in the configuration
of this interface.

154

Advertising