Dell PowerEdge FX2/FX2s - Manual (Page 411)

line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
Syntax banner login {keyboard-interactive | no keyboard-interactive}
[c line c]
Parameters
keyboard-
interactive Enter the keyword keyboard-interactive to require a
carriage return (CR) to get the message banner prompt.
c Enter a delineator character to specify the limits of the text
banner. The delineator is a percent character (%).
line Enter a text string for your text banner message ending the
message with your delineator. The delineator is a percent
character (%). Range: maximum of 50 lines, up to 255
characters per line
Defaults No banner is configured and the CR is required when creating a banner.
Command
Modes CONFIGURATION
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information After entering the banner login command, type one or more spaces and a
delineator character. Enter the banner text then the second delineator character.
When the user is connected to the router, if a message of the day banner is
configured, it displays first. If no message of the day banner is configured, the login
banner and prompt appear. After the user has logged in, the EXEC banner (if
configured) displays.
Example
Dell(conf)#banner login ?
keyboard-interactive Press enter key to get prompt
LINE c banner-text c, where 'c' is a delimiting character
Dell(conf)#no banner login ?
keyboard-interactive Prompt will be displayed by default
<cr>
Dell(conf)#banner login keyboard-interactive
Enter TEXT message. End with the character '%'.
This is the banner%
Dell(conf)#end
Dell#exit
13d21h9m: %RPM0-P:CP %SEC-5-LOGOUT: Exec session is terminated
for user on line console
This is the banner
Dell con0 now available
Press RETURN to get started.
13d21h10m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful
for user on line console
411