Dell PowerEdge FX2/FX2s - Manual (Page 42)

• For a file on a TFTP server, enter tftp://hostip/
filepath.
• For a file on the external Flash, enter usbflash://
filepath then the filename.
Defaults none
Command
Modes EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
NOTE: A filepath that contains a dot ( . ) is not supported.
Example
Dell#show os-version
RELEASE IMAGE INFORMATION :
---------------------------------------------------------------
------
Platform Version Size
ReleaseTime
F-Series: FN 1-0(0-1862) 49927023 Feb 4 2014
22:13:23
TARGET IMAGE INFORMATION :
---------------------------------------------------------------
------
Type Version Target
checksum
runtime 1-0(0-1862) Control Processor
passed
CPLD IMAGE INFORMATION :
---------------------------------------------------------------
------
Card CPLD Name Version
Stack-unit 0 IOM SYSTEM CPLD 7
Dell#
show running-config
Displays the current configuration and display changes from the default values.
Syntax show running-config [entity] [configured] [status]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default)
configuration, enter one of the following keywords:
NOTE: If you did not configure anything for that entity,
nothing displays and the prompt returns.
42