Dell PowerEdge FX2/FX2s - Manual (Page 76)

save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename (max
20 chars))
Command
Modes
• EXEC Privilege
Command
History
Version 9.4(0.0) Supported on the FN I/O aggregator.
Usage
Information
Without the page or stack-unit option, the command output is continuous, use
Ctrl-z to interrupt the command output.
The save option works with other filtering commands. This allows you to save
specific information of a show command. The save entry must always be the last
option.
For example: Dell#show tech-support |grep regular-expression |
except regular-expression | find regular-expression | save
flash://result
This display output is an accumulation of the same information that is displayed
when you execute one of the following showcommands:
• show version
• show clock
• show running-config
• show system stack-ports
• show interfaces
• show process memory
• show processes cpu
• show file system
• show system
• show environment
• show ip traffic
• show ip management route
• show ip route summary
• show Inventory
• show log summary
• show command-history (last 20 commands)
• show log
Example (save)
Dell#show tech-support ?
page Page through output
stack-unit Unit Number
| Pipe through a command
<cr>
Dell#show tech-support stack-unit 1 ?
76