Dell PowerEdge FX2/FX2s - Manual (Page 290)

Field Description
FCF Priority The priority used by a server to select an upstream FCoE
forwarder.
Config-State Indicates whether the configured FCoE and FC parameters
in the FCoE map are valid: Active (all mandatory FCoE and
FC parameters are correctly configured) or Incomplete
(either the FC-MAP value, fabric ID, or VLAN ID are not
correctly configured).
Oper-State Operational status of link to the fabric: Up (link is up and
transmitting FC traffic), Down (link is down and not
transmitting FC traffic), Link-wait (link is up and waiting for
FLOGI to complete on peer FC port), or Removed (port has
been shut down).
Members FN2210S Aggregator with the FC Flex IO module Ethernet
and FC ports that are members of the dedicated FCoE VLAN
that carries storage traffic to the specified fabric.
Example
Dell#show fcoe-map brief
Fabric-Name Fabric-Id Vlan-Id FC-MAP FCF-Priority Config-
State Oper-State
test 16 16 0efc02 128
ACTIVE UP
cnatest 1003 1003 0efc03 128
ACTIVE UP
sitest 1004 1004 0efc04 128
ACTIVE DOWN
Dell#show fcoe-map si
Fabric Name si
Fabric Id 1004
Vlan Id 1004
Vlan priority 3
FC-MAP 0efc04
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State DOWN
Members
Related
Commands
fcoe-map — creates an FCoE map which contains the parameters used in the
communication between servers and a SAN fabric.
show fc sw
Display the switch configuration for Fibre Channel capability.
Syntax show fc sw
290